Err

Since 1993, supplying tiles and bathrooms
Sales
01633 875003
TDXCEL Range Professional Ultra Hard Material Drill Bit Set
This range of drill bits offer unrivalled performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required. The M14 connection allows use on an angle grinder�or with the adaptor these�bits can be used in a Mains powered drill with a three jaw chuck. (For use on angle grinders & mains powered drills)

 The XCEL range of products are simply our best in class, due to an uncompromised use of raw materials in their manufacture they offer the user a cutting or drilling experience that is faster and cleaner with an optimum cost per cut.

Applications: Porcelain, Granite & Ceramic Tile.

Kit Contents:

6mm Tile Drill Bit
7mm Tile Drill Bit
8mm Tile Drill Bit
10mm Tile Drill Bit
M14 to Hex Chuck Adapter
Additional Cooling Wax
Robust Carry Case
Applications:

Porcelain
Ceramic Tiles
Stone Tiles
Stone Workshops
Granite
Marble
USEFUL INFORMATION:

Ensure you are using the correct type of machine for the drilling application (refer to the recommended RPM and machine instructions)

Ensure all forms of percussion or hammer action are turned off.

To start drilling, use a Mexco suction cup guide to enable an accurately positioned hole.

Alternatively place the drill at a 30 degree angle. Drill until tile drill bit starts to penetrate the material. Once the hole has started to form, bring the drill up into the upright position and continue.

Periodically remove the bit from the cut to allow cooling. For horizontal drilling minimal pressure is required. For vertical drilling the weight of the machine will give sufficient pressure.

The tip of the drill bit will become HOT, please handle with care and wear suitable PPE. Use on high speed drill (1800rpm) predominately this will be a corded machine not a cordless.

Only use for drilling the tile, not the material behind the tile. Use appropriate drill bit following penetration of tile.